Feeds:
Posts
Comments

Posts Tagged ‘refashioning’

After making a prototype plus-sized 20’s flapper style dress for myself from some scarves and a refashioned skirt, I felt confident about trying another and using the “better” scarf. What I liked about it was that it had a very period appropriate, Art Deco pattern and sparkly details. I’d also found a black satin, tiered skirt to use for the bottom.

Having had a trial run at the design, I knew exactly the length I needed for the front and back panels of the dress. This scarf was a bit shorter than the “practice” one, but was the same width. I still cut from the middle, but this meant there was a bit less left-over for the sleeves.

20blk1

To finish the top, the cut seams were sewn together to close the shoulders. I then cut out the neckline, working around what looked good with the pattern and my comfort. The scarf looks like silk but is polyester, so I was able to finish the edges of the neck-line by careful burning. This is a great trick when it works but you MUST do fabric tests before risking a bigger piece. It’s also important to keep safety in mind at all times when setting fabric on fire!

20blk3

The sides were done with pieces of a fine black crepe from the stash. I used the same fabric for most of the sleeves but was able to edge the top of the sleeve slits with what came out of the middle of the scarf. A vintage black button with a white rhinestone, closed each sleeve slit.

A pretty black silk burnout scarf was used to make up the dropped waistline. It had beaded details on each end as well as long beaded fringe and a pair of small black fur balls on each end. All of these were perfect for the period and I wanted to show them off as much as possible. To do so, I figured out how much I’d need of the ends to get the look of a knot and some swing. Those pieces were cut from each end. The centre piece was then roughly hand-sewn down to a strip of black satin along the top and bottom edges. The satin was slightly narrower than the scarf so it has some bag and movement, to further sell the look of the waistband being a scarf. The centre wasn’t long enough to cover the whole waistband but I had another black silk scarf and I was able to cheat and use it on the back. The removed ends of the scarf were shaped into a knot and then hand- stitched back on to the waistband.

20blk2

The light satin skirt that was chosen for the bottom started with 3 tiers of fabric. The top tier was too small to use so it was taken off. The gathering along the top of the second tier was really helpful because it made it very easy to exactly match the width to the bottom of the waistband. I just had to let the gathering out enough to line them up! Losing the top layer also kept the length from being too long. It came to below the knee on me, but would be almost floor length for a shorter person.

20sblk5

We had some beaded trim in our supply stash that not only matched the beading on the waist scarf, but also tied into the bead and sequin details on the skirt! A line of the trim was added between the top and waist and again between the waist and the bottom skirt. There was also a fine fringe on the main body scarf that was left and it falls over to further accent the beading.

This design came together very quickly with the waistband details being the most complicated sewing involved. The finished dress has great swing and flow and is light and comfortable to wear. There is still the issue of the burnout in the velvet being see-through but I just wore a camisole under it and that worked perfectly. I realized after you could tie in any other colours you wanted by wearing a close-fitting tank or even long-sleeved shirt underneath and it would show through.

I made a headpiece to go with it, but that will get it’s own post.

Read Full Post »

With the refashioning and remaking of men’s shirts, I’ve been mostly making casual and “work” wear plus-sized dresses but that’s not all I’ve needed. One of the other problems with finding suitable plus-sized clothing is when you have an special event or need things a bit more costumey. Last fall I was going to a 20’s themed event and wanted a period flapper style dress. There are some places doing repro dresses, but I couldn’t find anything I liked in my size so making it became necessary. I did a bit of research into period dress styles first to see if I was going to have to invest in a pattern but looking at how big the range of variations was, I decided it was possible to get away with just upping my modding game.

We had a couple of beaded/sequined jackets in the stash and the original plan was to salvage panels from them, mix the panels with silk or crepe fabric and make the bottom from another skirt or a scarf. We had a couple of black silk burnout velvet scarves but went looking and found another silk scarf and 2 large polyester velvet ones.

As I was laying out the various possible parts, and sketching some options, I realized that the scarves were large enough that we could just skip the whole plan of fussing with the beaded stuff and use the scarves as the upper body of the dress. The 2 polyester scarves were quite large and rectangular and had designs that were already very 20’s while the new silk scarf was long and narrow with a great chevron pattern and beading that coordinated with some beaded trim in the stash. I had seen a few period dresses that used a faux scarf detail as the low “waist” so that seemed like a good way to transition to a skirt and complete the dress.

1st20s1

It seemed like a good design concept, but I was concerned about how well it would work out in practice and I wanted to be sure that the fit would be right. Rather than making a muslin prototype, I figured that we had 2 of the big scarves and a pair of possible skirts so I might as well go ahead and make a second dress.

The first step was basic math. I measured the scarf in both directions and then myself, both around the widest section and then down the front to get the dropped waist length. The scarf was quite a bit longer than needed for the top so a section was taken out of the middle, leaving 2 pieces the right length. (and handily with finished hems on 3 sides) I calculated the size for a pair of fabric inserts for the sides. They were a bit narrower at the top, and slightly curved there since that was the bottom of the arm-holes. The thin black crepe that was used for the inserts also made up the bottom of the sleeves. The sleeve tops were done using the left-over section of the scarf. The split-top style really appealed to me since it gives a sense of being sleeveless without actually exposing the upper-arms and is still period accurate.

1st20s2

For the bottom of the dress, I used a pleated black satin skirt. It was small, but I only needed the bottom 1′ or so and there was enough flair to it that it fit just fine. It had some nice button details on the waist band so that was removed and used as the front panel of the transition section. The back was cut from some black satin we had in the stash.

The donor scarf was dark pink/purple as well as black and we had some beaded trim that matched so a line of it was added between the bottom of the scarf and the top of the transition section.

The neckline had to be hand-finished with a rolled hem but I cheated on the inside of the sleeves and did those with the machine.

20sdress3

The whole thing came together really quickly and mostly had simple straight seams. Making the trial version helped out since this one came out a bit bigger than needed as well as too short for me. I also found the beaded trim more of hassle than expected but figured out how to work with it by doing this one. It didn’t help that the trim was on a bright pink ribbon so any spots where it wasn’t perfectly caught are super obvious.

The biggest issue is that the burnout velvet is partially see-through. I’m wearing a sports-bra in the pictures, which is an option, but any black or colour coordinating slip, tank or camisole worn underneath will work.

Read Full Post »

This is showing how I remade a regular sized men’s plaid shirt into a cute plus-sized ladies top. I may very much enjoy “dresses” I can wear over leggings, but I do live in Canada and the winters are cold. Since there is a chunk of the year that I have to wear real pants, I also need tops to go with them. Plaid is lovely stuff for winter with it being so soft and cozy but as usual, finding nice options in plus sizes is difficult. I also wanted a bit more a feminine feel than most men’s plaid shirts provide. I’d seen examples of ombre bleach fading and I liked how it both softened the look and added a bit of style. It seemed simple enough that I had to try it.

Finding a few suitable starting pieces took a bit of hunting but I came across this beautiful rainbow plaid from American Eagle. It was an extra large, but their sizing runs small so it was too tight for me, including the arms.

The first thing was to do the ombre fade. I tried a few levels of bleach dilution and realized that you have to start with pure bleach. I used a spray bottle, outside on the cement driveway. To get a visible fade, I never went below 50% dilution, but just finished the fade out by lighter spraying. As soon as it was where I wanted, the whole thing was rinsed several times in clear water and then dried. (if I had realized exactly how I was going to alter the sleeves, that should have been done before the fading)

rainplaidshirt2

It needed to be made quite a bit larger so the sleeves were cut off to the elbow length and then I fully cut out the side seams, including down what was left of the arms. The sleeves were enlarged by adding some of the cut-off forearm along the bottom. It was then finished along the top with the salvaged cuffs and a rolled hem completing the space between the cuff edges.

rainplaidshirt3

The fade helped to soften the style, but I wanted to make it even more feminine and used a cream cotton eyelet lace to make the side inserts. (it also matched the lightest bottom of the fade) It was quite long for eyelet, but was still only about 2/3rds of the length of the sides. To make it fit, I layered a second panel over the first. This gave a bit of ruffle feel to the sides without adding much volume and it meant there was a second layer of fabric under the higher eyelets which made me more comfortable.

In this case, the buttons were left since they read as more decorative on the lightened fabric.

I love this top! It’s so soft and cheery and the swing of the expanded size combined with it’s bright colours and lace accents make it read as quite fun and feminine.

rainplaidshirt5

Read Full Post »

The first round of serious clothes altering was when I started making myself some very plain shirt dresses. While you’ll see a number of dresses that look like they are a slightly altered men’s shirt they are pretty much only for the typical “model” body type. I had never found any in plus sizes or anything remotely close.

basic3

I was looking for tops that I could wear with leggings while working at the shop or around the house/garden. There were a bunch of boxes any possible item had to fill.

It had to (in no order):

  • be easily washable and not need ironing
  • be a light, breathable fabric but not see-through or clingy
  • print, plaid or mid-tone colour preferred since it might get smudged
  • have mid-length sleeves so I don’t have to keep pushing them up
  • not be constrictive or limit movement
  • pull-over preferred
  • needs to cover my butt
  • cheap enough that I won’t cry if it gets ruined (paint, putty and sharp objects are all risks)
  • hopefully at least “cute” if not high fashion

Not really an excessive list of demands, but I wasn’t having any luck. Instead, we found a few really good quality, brand new, 3X and 4X men’s shirts at our local thrift store and they seemed a good place to start. They were all under $5 each so there was little risk in jumping right in. The collars for that size of shirt are proportional for a man so were very large. To keep them from looking too weird, we just cut them off and made either a v-neck or a simple curve. One v-neck ended up a bit too deep for me so a small insert was made from the left-over bits. They were all big enough to be pulled over my head so the fronts were sewn down. The ones that were not short sleeved already had the sleeves cut off and finished with a straight hem. To help the flow and keep them from catching on my hips, I opened up the side seams and finished each side with the same straight hem. This gives a more tunic-like look.

basic2

The only other thing was some light darting to give a bit of shape around the waist. The trick with those was that I put it on inside out, pinned the darts; top, bottom and depth, on one side. Then slipped it off, matched the other side so they lined up perfectly and did each as a single sewn line. While it’s very fast and easy, the darts are what really sell these as dresses, not men’s shirts. Of course, if you want and it better suits your body, it’s also easier to not bother with the darts, although you way want to take the bottom seam of the sleeves in a bit so they don’t gape. Those with a very large chest might find it works best to take it in a bit along the bottom for the same reason. No matter what you need, pinning it while it’s inside out should work to help adjust the fit. It’s all about what suits you best!

basic1

Read Full Post »

%d bloggers like this: